Description Technical Information Input Voltage – 85~264VAC (120~370VDC) Input Current – 5A Input Frequency – 47~63Hz Inrush Current – cold start, 20A/115V, 40A/230V Input Leakage Current – < 1mA/230VAC Line Regulation (full load) – ± 0.5% Voltage Adjust Range – ± 10% Output Overload Protection – 105~150%, hiccup mode, auto recovery Output Over Voltage Protection – 105~150%, hiccup mode, auto recovery Short Circuit Protection – hiccup mode, auto recovery Rise Time – 50ms @full load (typical) Hold Up Time – 20ms @full load (typical) Mechanical Feature – enclosed Operating Temperature – -20°C ~ 70°C(ref. derating curve) Storage Temperature – -20°C ~ 85°C Operating Humidity – 20%~93%RH(non condensing) Storage Humidity – 20%~95%RH(non condensing) MTBF – >100,000 hours Cooling – convection Safety Standards – GB4943, UL60950, EN60950 EMC Standards GB9254, EN55022 Class B EN55024, EN61000-3 2,3 EN61000-4 2,3,4,5,6,8,11 Withstand Voltage I/P –O/P: 3.0KVAC/1minO/P: 3.0KVAC/1min I/P — PE: 1.5KVAC/1minPE: 1.5KVAC/1min O/P–PE: 0.5KVAC/1minPE: 0.5KVAC/1min Vibration 10~150Hz, 2G 10min/1cycle 30min each along X, Y, Z axes Connection – 5P/9.5mm screw terminal block Packing – 0.37kgs, 42pcs/17.5kgs/0.035CBM per carton Note All parameters are measured at 230VAC input, rated load and 25°C ambient temperature. Line regulation is measured from low line to high line at rated load. Load regulation is measured from 0% to 100% of rated load for single output models. For multi-output models, it is measured from 20% to 100% of rated load, and other output at 60% rated load. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor. The power supply is regarded as a component which will be installed into the final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
